The Tri Blend Adult Tee - Sizes S-XL
Our Tri-blend Tees consist of 50% polyester 25% cotton and 25% rayon giving you the best qualities from all three fabrics! They have the softness, strength, comfort and printability of cotton, the durability, moisture wicking, and non-wrinkling of polyester, and the luxurious drape and silky soft feeling of rayon.
With a tri-blend tee you can expect a trendy look in a wide array colors and ultimate in light weight comfort. Tri-blends typically have a bit higher price tag than your run-of-the-mill basic cotton tee, but we have done everything possible to keep our pricing better then other top brands tri-blend options.
Keep in mind, the little extra you spend on tri-blend t-shirts is well worth it in terms of wear-ability, quality and comfort, and as the adage goes - "you get what you pay for" and they are well worth it! The material is lightweight, durable, has a high absorbency, and is quick drying. Tri-blend has low wrinkling and shrinkage and is a perfect fabric for casual and sportswear.
How's the Fit?
How to measure
Measurements are the tee when laid flat. Measurements are from shoulder seam to hem and chest (arm-pit to arm-pit seam)
these tees are best with DTF, HTV and Screenprints.
Tri-blends can be heat sensitive due to the rayon. So we suggest using a lower temp for DTF - 280F for 15 seconds with heavy pressure.
- Lint roll
- Pre-press for 3 seconds to remove moisture
- Layout shirt flat on press, place your transfer & cover entire surface with paper (so fabric doesn't touch press at all)
- Press with heavy pressure for DTF press at 275F for 15 seconds
- We only use hot peel film, so let your film cool for 3-4 seconds and peel
- Repress (covered) for another 3 seconds
Wash your tri-blend inside out in cold water on a gentle cycle and for best results lay flat to dry. You can use a dryer but your tee will shrink up a bit, if you are ok with that you can tumble dry on low heat.

