SUBLIMATION LICENSE PLATE BOARDER - 6.5 X 12.25 .03 THICK

 Prepare artwork and size transfer according to the size and shape of the product.
* Image must be produced in reverse or “mirror image” 
* Place a sheet of plain white paper on the press.
* If the product has a protective plastic covering remove it.
* Using heat resistant tape, secure the image with the printed side of transfer facing the product
* Lay the imprintable face up on the heat press so that you are pressing onto the transfer.
* Cover imprintable with parchment or paper 

* License Plate Frames – Press at 385 degrees F for 65-75 seconds using Medium pressure 
* License Plate Aluminum Press at 385 degrees F for 75-80 seconds using Medium pressure   
* License Plate Clear Gloss Press at 385 degrees F for 70-75 seconds using Medium pressure 
* When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface