Metal Flip Top Lighter (measurements are 2.25" x 1.5" x .5") (does not come with lighter fuel)
This is a vintage style flip top lighter for sublimation.
Lighter measurements are 2.25" x 1.5" x .5"
(does not come with lighter fuel)
Pressing Instructions:
Do not remove the insert. Tape transfer to lighter (Do not use adhesive spray as it will leave a residue on your blank and will affect the quality of your image transfer) Use a pressing pillow for the most even pressure.
Press at 180c for 70 seconds with medium pressure.
Note: Not all presses and equipment are the same, so pressing instructions may vary